Not the program but just the bar flagging system. It loads the bar unto the channel and begins to flag the material in to the machine, but it's going to prevent and alarm out all over 75% of how in to the machine. Exactly the same mechanical pieces are used to force the material into machining place, Therefore the mechanical aspect is nice.
Via the simulation it is feasible to test mutual compatibility from the barfeeder and lathe interfaces. Webpage fifty four: Examination Mode
Get use of several handy digital capabilities and solutions and have all vital info at a glance. By using a central DMG MORI Account, You may use all services within the clock from everywhere and with any unit.
Chapter one – Description Approach DESCRIPTION SS2400T/S barfeeder feeds bars into the lathe as follows: • The loading mechanism will take a bar from the journal and places it into a set loading channel.
Distinctive films, technological content articles and site posts with deep insights into the DMG MORI product or service environment.
If you still choose to test, go the barfeeder slide each of the way forward, measure from your quite face in the collet during the collet chuck towards the mount around the SMW slide. That is the duration you need.
Special videos, technological content, and web site content with deep insights to the DMG MORI solution earth.
Through the use of this Web page you accept our terms and conditions and privateness policy. Specified emblems belong to their respective holders. Machineseeker Team GmbH would not believe legal responsibility to the material of connected exterior Internet websites.
MachineTools.com is not the seller of this product, and all communications regarding it source should be directed to the seller.
Our Web site makes use of cookies. By continuing to implement our Internet site without having changing your cookie options, you settle for our cookie plan. Click this link if you wish to know additional.
Unique videos, technological article content and blog site articles or blog posts with deep insights in to the DMG MORI item world.
Soon after watching the electrical manual for awhile, I did figure the vast majority of it out. Nevertheless, not attempting to Cook dinner something, I called the machine Instrument tech guy. Essentially, what he claimed was that the lathe was not initially set up for just a barfeed and he was gonna have to manually wire it in.
Chapter four – Operation this sort of quickly despatched M-codes could "merge" in a single code. The barfeeder is ready to tell apart the M-code leading edge only if it does not report the M-code conclusion towards the lathe. For this reason it is usually recommended to established the parameter #008 to Static on new lathes.
Generally, the top of Bar exam should be in This system ahead of feeding in order that an arbitrarily very long bar might be clamped while in the lathe at commence in the automatic cycle. Webpage sixty: Feeding To Situation (Ss2400S)